C-30ZX Ozone Monitor
Simple, Inexpensive Ozone Monitor
For water treatment plants, pulp bleaching mills, ozone
generator monitors, photocopier and laser printer centers,
fumigation projects, HVAC and indoor air quality systems, vehicular
pollution monitors, research labs and pilot plants, and wherever
ozone exposure is possible: the C-30ZX has a very fast and
continuous response. It is rugged and versitile. There are no
touchy controls.
Benefits:
Constantly monitors your work environment; shows the ozone
concentration by a multicolor graphical display, and alarms when
there is a health hazard
No installation typically required; easily understood by
non-technical personnel
Virtually no maintenance
Features:
LED readout changes color as ozone level increases
Audio alarm and output for data logger
Connections for external equipment control
For general monitoring and ozone control
Many accessories available such as data loggers, calibrators, and
protective enclosures with heaters and 4-20 mA outputs
Specifications:
Range: .02-.14ppm of ozone (LED scale); .02-.30 ppm via external
data readout
Bargraph Display: Normally green; yellow at .05 ppm (caution); red
at .1 ppm (danger)
Response time: Within tenths of seconds of ozone reaching the
sensor
Measurement principle: HMOS (heated metal oxide semiconductor)
sensor
Size: 85 × 35 × 60 mm (3.25 × 1.375 × 2.375 in)
Weight: 140 gr (5 oz)
Power requirements: 12 VDC at 300 mA. AC adapters available
worldwide.
Outputs: LED bargraph, audio alarm, 0-3 V analog output such as for
data loggers, and external alarm relay contacts; alarm actuation
and relay contact closure at .1 ppm (standard) and is programmable.